Drill Bits for Plastic (Acrylic, plexiglass, ABS, lexan, Polycarbonate, PVC) Norseman 7pc Acrylic Point Drill Set in Vinyl Pouch. Includes 1/8", 5/32", 3/16", 7/32" 1/4", 5/16", and 3/8" Part BG4650A

Product Information

As for the actual drilling technique, you want to apply a consistent but firm amount of pressure to the drill, to prevent the bit moving as you drill. You should take precise measurements and mark the area where you will be drilling. You must use a slower drill speed setting when drilling a large hole. You can also use a lubricant when drilling for deeper holes. Always observe the area around the hole. Start drilling carefully with an ideal drill bit for plastic. Final Words A lot of plastic pots have these built-in drip trays at the bottom. This is great and can help to prevent root rot, but it’s not as good as a drainage hole.

Each drill bit is designed for different purposes. For example, drill bits for concrete are not the same as those for plastics.

Best Drill Bits For Plastic

Choosing the correct type of drill for plastic is essential to ensure that your holes are uniformly shaped, clean, and undamaged. Knowing the right way to drill holes in plastic will save you a lot of time and resources. More gentle bits designed for use with wood will perform a little better, but may not have the right style of tip to make a clean entry into the plastic you’re drilling. Is it worth buying a drill bit set? The best solution is to add drainage holes to the bottom of your plant. Many pots come with drainage holes in them, but some do not! Why are drainage holes so important?

And carbide – usually tungsten carbide – is a similarly tough material, and is commonly used in the manufacture of masonry drill bits. Don’t worry about breaking it – once you remove it, you won’t need it any more. STEP 3: Flip the pot upside down

NEW HERE?

In this guide, we take a look at the best drill bits for plastic and share some tips on how to get the cleanest, smoothest holes when drilling this material. Which Drill Bits to Use on Plastic To ensure effective drilling into plastic, the most important thing is that the tip remains sharp. If the tip of your bit becomes dull over time, it will be much more likely to make a rough/jagged entry into the material you’re looking to drill. Spur-point drill bits are the best for drilling holes in plastic. The direction and angle in front of the drill help you ensure that stress is lowered and that the gap is smooth. I suggest you slow down as you cut to get a neat and clean hole. How Do You Drill A Hole In A Plastic?